Requirements
You need:
The computer that will run the VCE™ session, with an available USB-A slot.
The monitor that will display the VCE™ session.
An available power outlet (either from a wall outlet or an extension cord).
From the Yealink box, the
Yealink UVC34 unit
Power Adaptor and Cord (3,5m)
USB 2.0 Type-B to Type-A Cable (7m)
(optional) Velcro patch
Remote Control and 2x AAA batteries (included with the product)
Note: This guide assumes that the Yealink Conference Camera will be mounted on a monitor. To mount it on a wall, consult the manual included in the box.
Connecting the device
Mount the UVC34 unit atop the TV/computer monitor.
(optional) Stick the Velcro patch the monitor to ensure the stability of UVC34.
Connect the UVC34 to the computer and to a power source. Only use the provided Power Adaptor and Power Cord, and the USB Type-B to Type-A cable.
Tip: Use the supplied cable ties to secure and manage the cables.
The Remote Control (VCR20)
Operating the Camera
Make sure all relevant devices are connected and powered on.
Open the VCE™ web app.
(optional) Go to the 'Device test centre' tab, and select the UVC34 in the 'Select camera' and 'Select speakers' dropdown menus.
Enter a VCE™ session.
Go to 'Audio/Video Settings' (bottom left corner).
Select the UVC34 in the 'Speakers' and 'Main camera' dropdown menus.
If you need further assistance, you can:
Use the support tool (bottom right) in the VCE™ web app to ask a specific question. It has many more solutions for you.
If you don’t find what you need, send us a message through the same tool.